MTIS 12x24 Insert Snake

The EWI MTIS series snake is a medium quality professional insert snake. This snake is typically used to loop processing equipment like compressors and EQ's through a mixing console. On the 1/4" TS breakout fantail, each 1/4" TS connector is labeled with the channel number and designated as wired to the Tip or Ring of the 1/4" TRS connector on the other fantail. Additionally, the Tip wired TS connectors are identified with a Black compression nut on the connector and the Ring wired TS connectors are identified with a Red compression nut on the connector. Since the channel numbers of each fantail is labeled down the fantail and color coded to groups, this allows the user to identify the placement of the 1/4" TS connectors in an effects rack without removing the connectors from the panel jacks on the processing equipment. The 1/4" TRS channels are labeled Ch.1 thru Ch. 24. The 1/4" TS channels are labeled Ch 1 Tip and Ch 1 Ring thru Ch 24 Ring and Ch 24 Ring. The fantails are about 28 inches on each end. The 1/4" TS fantail has each channel of Send and Return grouped with about 12 spread on each channel grouping. The cable is constructed with 99.98% pure 22ga. high strand count copper conductors. The connectors are all EWI P292 and P292S models. The main trunk itself is somewhat stiff, but will limber up some with usage and is a "reasonable" stiffness for a 24ch. fully jacketed snake. The mesh grip strain relief hanger is included on the 1/4" TS end.